This stone patio project is looking great! You’ve finished digging out the area and the French drain is planned. Base material is expected on site tomorrow. Everything feels like it's moving in the right direction.
Then it rains overnight.
When you show up in the morning, dips and low spots are holding pools of water. It looks like there are some ridges where you’d thought the surface was smooth. The grade looked fine yesterday — you made a bunch of passes… What happened? Ah, well...time to get back to work.
Ever seen something like this play out on a patio project or other landscaping job? The issue isn't your effort. It's probably the grading tools.
Many grading problems can be pinned on the wrong skid steer attachment. A bucket is great for moving material, but isn't the best tool for creating a finished surface.
It’s not easy to perfectly cut high spots and redistribute material evenly, so repeated bucket passes often just kinda push dirt around. The surface may even look okay from the operator's seat, but the truth comes out once water enters the equation.
Beyond bucket try-harding, a few other common landscaping do’s and don’ts for grading work include:
These snafus are probably to blame if you’re left with dips, ridges, ponding water, and extra work.
A land leveler for skid steer work is designed from the ground-up for efficient, even shaping of broad surface areas. The cutting edge shaves down high spots while allowing material to simultaneously fill in low areas behind it. Unlike with a bucket, you’re not creating waves across the surface but a consistent and level grade.
You may not achieve perfection in a single pass. Still, the goal is to make steady, controlled improvements across the entire surface in as few passes as possible. Take it slow and let the tool do the work. A skid steer land leveler attachment gives operators superior control over the finished result.
Here’s a basic sequence for a good grade:
If you try to skip ahead, you’re in for a world of frustration. Finish work cannot fix a rough grade, so get the foundational steps right first.
What if the project calls for a bit more than just a level grade? Think about seedbed preparation or decorative landscaping and other high-visibility finished surfaces. Jobs like those can use one final refinement with a soil conditioner attachment.
After the land leveler establishes grade, a soil conditioner can break up remaining clumps, remove rocks and debris, and leave behind a cleaner, tighter finish ready for planting or installation.
The land leveler is the tool that creates the shape. The soil conditioner helps polish it.
At the end of the day, we get it. Changing tools is another step. You CAN grade with a bucket…People do it every day.
You can also drive nails with a crescent wrench.
At some point, though, you're just making the job harder than it needs to be. If you've ever spent half a day knocking down ridges, you've already learned the lesson.
Contractors who do a lot of patios and finish grading eventually end up with a land leveler. There’s just less fiddling around, staring at a spot thinking, "Is that good?"
Pair the Prime Land Leveler with a Prime Soil Conditioner, and you'll spend less time chasing your tail. When conditions get tough, badass equipment carries you through.